Our success is a direct result of knowing how to market a brand and having the right people representing the brand.
 
Abstron

Chemical, Electrical Properties and Processing Data of Abstron ABS Resin
CHEMICAL PROPERTIES

"Resistant to mineral acids, alkalis, phosphoric, oleic acids and aqueous solutions such as ferric sulphate, sodium carbonate, Ammonium chloride, copper sulphate, sodium chloride, sodium bisulphite, ferric chloride, food acids, hydrogen peroxide (3%) Bleaches and mineral oils." ABStron ABS demonstrates excellent resistance to mineral and lubricating oils, gasoline and other petroleum fractions. "Not recommended for service in contact with lower molecular weight aromatics, ketones, esters or poly chlorinated hydrocarbons. Such organic solvents will swell, soften or dissolve abs."

ELECTRICAL PROPERTIES

Dielectric strength KV/mm short time 1/8 inch 30-45
Dielectric constant At 60 cps 3.0-5.0 
  At 1,000,000 CPS 2.8-3.8
Volume resistivityOhm-cm (73 Deg F, 35% RH) 10 13-10 16
Dissipation factor At 60 cps 0.04- 0.34
  At 1,000,000 CPS 0.06- 0.11

PROCESSING DATA:Injection Moulding
  • Raw material pre-heating temp. = 85 - 105 Deg C for the period of 3 hours (based on various grades) 
  • Machine Cylinder temp. = 165 - 240 Deg C (based on various grades)
EXTRUSION
  • Extruder Temperature = 215 - 230 Deg C
  • Die Temperature = 210 - 220 Deg C

ABStron ABS resins are produced in technical collaboration with Sumitomo Chemical Engineering Corporation, Japan.